HVP-50 Specifications
| TEMPERATURE | |
| Operating Range | 105ºC to 135ºC |
| Display Range | 5ºC to 140ºC |
| GAUGE PRESSURE | |
| Operating Range (gauge) | 3 to 28.4 psi (0.2 to 2.0 kg/cm² ) |
| TIMER | |
| Sterilization | 1 to 250 minutes |
| Drying | 1 to 90 minutes |
| DIMENSIONS | |
| Overall (W x D x H) | 20.1" x 24.8" x 40.9" (51 x 63 x 104) cm |
| Chamber (Diameter x Height) |
50 liter 11.8" x 28" (30 cm x 71 cm) |
| SAFETY DEVICES | Temperature- and pressure-sensitive lid interlock, over-pressure power cutoff, over-temperature power cutoff, low-water power cutoff, mechanical pressure relief valve, lid-closure detector, over-current detector and circuit breaker with ground fault circuit interrupter. |
| PROGRAMS | |
| 1. For solids with drying | Heating and air removal from chamber by vacuum pump (pre-vac) -> Sterilization -> Water and steam exhaust (fast) -> Drying by heat and vacuum -> Completion |
| 2. For wastes/solids without drying | Heating -> Pre-vac -> Sterilization -> Steam exhaust (fast) -> Completion |
| 3. For liquids/agar | Heating -> Sterilization -> Auto steam exhaust (programmable rates, or ambient cooling w/o steam exhaust) -> Completion |
| 4. Drying without sterilization | Drying with heat and vacuum (time programmable) -> Completion(for additional drying after Program #1, if desired) |
| ACCESSORIES | |
| Stainless steel | Mesh wire baskets, buckets (pails), and round test tube racks |
| Factory or field installed | Data logger |
| POWER | |
| Source | 120V, 50/60 Hz, single phase (220V/240V available on request) |
| Consumption | 2000 watts (2000 VA) |
| SHIPPING WEIGHT | 291 lb (133 kg) |
WARRANTY: Autoclaves are protected by a 12-month warranty.